Mazda CX-5 Manual page 666

Maintenance and Care
Owner Maintenance
3. Pull the centre of each plastic retainer
using a flathead screwdriver and
remove the retainers, and then partially
peel back the over fender.
4. Pull the centre of each plastic retainer
using a flathead screwdriver and
remove the retainers, and then partially
peel back the mudguard.
5. Turn the socket and bulb assembly
anticlockwise and remove it.
6-54
Removal
Installation
Removal
Installation
6. Disconnect the bulb from the socket.
7. Install the new bulb in the reverse
order of the removal procedure.
Rear direction indicator lights, Brake
lights/Tail lights (Type B)
1. Make sure the ignition is switched off,
and the headlight switch is off.
2. Wrap a small flathead screwdriver with
a soft cloth to prevent damage to the
cover, and then remove the cover with
the flathead screwdriver.