Mazda CX-5 Manual page 499

4. Rotate the audio control dial and select
the name of the paired device you
would like to delete.
NOTE
Only the names of paired devices can
be displayed. If only one device is
paired, only the name for this device is
displayed.
5. If a selection other than "GO BACK"
is made and the audio control dial is
pressed, "SURE ? NO" is displayed.
6. Rotate the audio control dial clockwise
and switch the display to "SURE ?
YES".
NOTE
The display changes as follows
depending on whether the audio
control dial is rotated clockwise or
anticlockwise.
-Clockwise: "SURE ? YES" displayed
-Anticlockwise: "SURE ? NO"
displayed
Audio Set [Type A (non-touchscreen)]
Device name 1
Device name 2
Device name 3
Device name 4
Device name 5
Device name 6
Device name 7
7. Press the audio control dial to delete
the selected device.
NOTE
Select "GO BACK" and press the
audio control dial to return to the
"PAIR DELETE" display.
8. "PAIR DELETED" is displayed for 3
seconds after the deletion is completed,
and then it returns to the normal
display.
NOTE
If an error occurs while trying to
delete the paired device, "Err" flashes
in the display for 3 seconds and the
display returns to "LINK DELETE".
®
▼ Bluetooth
audio device information
display
1. Using the audio control dial, select the
pair device information display mode
"DEVICE INFO" in the "BT SETUP"
mode. (Refer to "Bluetooth
device set-up" for details.)
2. Press the audio control dial to
determine the mode.
3. The name of the Bluetooth
device is displayed.
4. Rotate the audio control dial to select
the information for the Bluetooth
which you would like to view.
Interior Features
®
audio
®
unit
®
unit
Device name
BT address
5-45