Mazda CX-5 Manual page 496

Interior Features
Audio Set [Type A (non-touchscreen)]
Pairing a Bluetooth
which has a four-digit PIN code
1. Using the audio control dial, select the
pairing mode "PAIR DEVICE" in the
"BT SETUP" mode. (Refer to
®
"Bluetooth
audio device set-up" for
details.)
2. Press the audio control dial to
determine the mode.
After "ENTER PIN" is displayed on
the audio display for 3 seconds, "PIN
0000" is displayed and the PIN code
can be input.
3. Input the PIN code of your Bluetooth
audio device by pressing channel
preset buttons 1 to 4 while "PIN 0000"
is displayed.
Press channel preset button 1 to input
the first digit, 2 for the second, 3 for
the third, and 4 for the forth. For
example, if the PIN code were "4213",
press channel preset button 1 four
times (1, 2, 3, 4), button 2 twice (1, 2),
button 3 once (1), and button 4 three
times (1, 2, 3). If the "PIN 0000"
display disappears before finishing the
PIN code input, repeat the procedure
from Step 1.
NOTE
Some devices accept only a particular
pairing code (Usually, "0000" or
"1234").
If pairing cannot be completed, refer to
the owner's manual of your mobile
device, and try those numbers if
necessary.
4. Press the audio control dial while the
input PIN code is displayed.
"PAIRING" flashes on the display.
5-42
®
audio device 5. Operate the Bluetooth
and set it to the pairing mode while
"PAIRING" is flashing.
6. When the pairing is completed, " "
and "PAIR SUCCESS" are displayed
after about 10 — 30 seconds, after
which "PAIR SUCCESS" continues to
be displayed for 3 seconds, and then
the unit returns to the normal display.
NOTE
Some Bluetooth

a certain amount of time before the
" " symbol is displayed.
®
If the pairing failed, "Err" flashes

for 3 seconds.
Pairing cannot be performed while

the vehicle is moving. If you attempt
to perform pairing while the vehicle
is moving, "PAIR DISABLE" is
displayed.
If seven Bluetooth

have already been paired to the
vehicle, pairing cannot be performed
and "MEMORY FULL" is
displayed. Delete one paired device
to pair another one.
Pairing a Bluetooth
which does not have a four-digit PIN
code
1. Using the audio control dial, select the
pairing mode "PAIR DEVICE" in the
"BT SETUP" mode. (Refer to
"Bluetooth
2. Press the audio control dial to
determine the mode. After "ENTER
PIN" is displayed on the audio display
for 3 seconds, "PIN 0000" is displayed
and the PIN code can be input.
®
audio device
®
audio devices need
®
audio devices
®
audio device
®
audio set up" for details.)