Mazda CX-5 Manual page 497

3. Press the audio control dial while "PIN
0000" is displayed.
"PAIRING" flashes on the audio
display.
4. Operate the Bluetooth
and set it to the pairing mode while
"PAIRING" is flashing.
5. As the Bluetooth
requires a PIN code, input "0000".
6. When the pairing is completed, " "
and "PAIR SUCCESS" are displayed
after about 10 — 30 seconds, after
which "PAIR SUCCESS" continues to
be displayed for 3 seconds, and then
the unit returns to the normal display.
NOTE
If pairing cannot be completed, try

"1234" instead. Refer to the owner's
manual of your mobile device for the
right PIN code.
Some Bluetooth

a certain amount of time before the
" " symbol is displayed.
If the pairing failed, "Err" flashes

for 3 seconds.
Pairing cannot be performed while

the vehicle is moving. If you attempt
to perform pairing while the vehicle
is moving, "PAIR DISABLE" is
displayed.
If seven Bluetooth

have already been paired to the
vehicle, pairing cannot be performed
and "MEMORY FULL" is
displayed. Delete one paired device
to pair another one.
Audio Set [Type A (non-touchscreen)]
®
audio device
®
audio device
®
audio devices need
®
audio devices
▼ Device selection (Bluetooth
If several devices have been paired, the
®
Bluetooth unit links the device last
paired. If you would like to link a different
paired device, it is necessary to change the
link. The order of device priority after the
link has been changed is maintained even
when the ignition is switched off.
1. Using the audio control dial, select the
link change mode "LINK CHANGE"
in the "BT SETUP" mode. (Refer to
®
"Bluetooth
audio device set-up" for
details.)
2. Press the audio control dial to
determine the mode.
3. The name of the currently linked
®
Bluetooth audio device is displayed.
If no Bluetooth
currently linked, the name of the first
device among the paired devices is
displayed.
Interior Features
®
Audio)
®
audio device is
5-43