Maintenance and Care
Owner Maintenance
3. Insert the tape-wrapped flathead
screwdriver into the gap and slide it in
the direction of the arrow.
Cover
4. Twist the flathead screwdriver in the
direction of the arrow and remove the
cover.
Cover
5. Remove the battery cap, then remove
the battery.
6-46
Gap
6. Insert a new battery with the positive
7. Close the cover.
8. Reinsert the auxiliary key.
CAUTION
Be careful not to allow the rubber
ring shown in the figure to be
scratched or damaged.
If the rubber ring detaches, reattach
it before inserting a new battery.
Rubber ring
pole facing up, and then cover the
battery with the battery cap.