Mazda CX-5 Manual page 421

NOTE
When the ignition is switched OFF, the
system status before it was turned off is
maintained. For example, if the ignition is
switched OFF with the cruise control
system operable, the system will be
operable when the ignition is switched ON
the next time.
▼ To Set Speed
1. (With Adjustable Speed Limiter
(ASL))
Activate the cruise control system by
pressing the MODE switch. The cruise
main indication (white) is displayed.
(Without Adjustable Speed Limiter
(ASL))
Activate the cruise control system by
pressing the ON switch. The cruise
main indication (white) is displayed.
2. Accelerate to the desired speed, which
must be more than 25 km/h (16 mph).
3. Set the cruise control by pressing the
SET/ switch at the desired speed. The
cruise control is set at the moment the
SET/ switch is pressed. Release the
accelerator pedal simultaneously. The
cruise set indication (green) is
displayed.
NOTE
The cruise control speed setting cannot

be performed under the following
conditions:
(Automatic transaxle)

The selector lever is in the P or N
position.
(Manual transaxle)

The shift lever is in the neutral
position.
The parking brake is applied.

(Vehicles with Adjustable Speed

Limiter (ASL))
The MODE switch for the Adjustable
Speed Limiter (ASL) is pressed.
Release the SET/ or RES/ switch at

the desired speed, otherwise the speed
will continue increasing while the RES/
switch is pressed and held, and
continue decreasing while the SET/
switch is pressed and held (except when
the accelerator pedal is depressed).
On a steep grade, the vehicle may

momentarily slow down while
ascending, or speed up while
descending.
The cruise control will cancel if the

vehicle speed decreases below 21 km/h
(13 mph) when climbing a steep grade.
The cruise control may cancel at about

15 km/h (9 mph) below the preset speed
such as when climbing a long, steep
grade.
When Driving
Cruise Control
4-263