Appendix G: Safety Requirements; General Safety Guidelines - Hitachi G1500 Hardware Manual

Virtual storage platform
Hide thumbs Also See for G1500:
Table of Contents

Advertisement

Appendix G: Safety requirements

Install Hitachi Vantara equipment in accordance with the local safety codes and
regulations that apply to the facility. This chapter describes additional safety information
that can apply to your facility. Read and follow the safety guidelines in this chapter
before installing the equipment.

General safety guidelines

Observe the following general site guidelines:
General requirements: The data center must comply with all applicable safety
regulations, standards, and requirements for installing and operating industrial
computer equipment similar to a storage system.
Fire protection: The data center must have an operational fire protection system
appropriate for use with computer and electrical equipment.
Hazards: The data center must be free of hazards (for example, cables on the floor
that can block access or cause people to trip).
Equipment modifications: Do not make mechanical or electrical modifications to the
equipment. Hitachi Vantara is not responsible for regulatory compliance of a modified
Hitachi Vantara product.
Earthquake safety: To minimize personal injury in the event of an earthquake,
securely fasten the control and drive chassis to a rigid structure extending from the
floor to the ceiling or from the walls of the room in which the system is located.
Cabling: Do not block walkways when routing cables. Do not place heavy materials on
cables. Do not place cables near any possible source of heat.
Warning and safety labels: Safety warnings, cautions, and instructions in various
languages are attached to the storage system components. The safety warnings
provide guidelines to follow when working with any equipment. Before working on
the storage system, read all safety and warning labels attached to it. If the labels
become dirty, damaged, unreadable, or peel off, contact the Hitachi Vantara support
center.
Authorized personnel: Allow only qualified and authorized personnel (for example, a
certified electrician) to perform hazardous tasks.
Hitachi Virtual Storage Platform G1000, G1500, and VSP F1500 Hardware Guide
Appendix G: Safety requirements
163

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

F1500G1000

Table of Contents