Appendix C: Electrical Specifications - Hitachi G1500 Hardware Manual

Appendix C: Electrical specifications

The VSP G1000, VSP G1500, and VSP F1500 storage system PDUs support both single-
phase or three-phase AC power. The system components use single phase 220 VAC.
Input Power to
Item
DKC PS Single phase,
2 pole + ground
UBX PS
AC 200 V -8%
SBX PS
min to
FBX PS
AC 240 V +6%
max
Notes:
1. The maximum current in case AC input is not a redundant configuration (in case
of 184 V [200 V - 8%]).
2. The maximum current in case AC input is a redundant configuration (in case of
184 V [200 V - 8%]).
3. 110/120 VAC system is not supported.
Power Supply Locations
The following figure shows the locations of the power supplies in a controller chassis,
LFF/SFF drive chassis, and FMD chassis.
Hitachi Virtual Storage Platform G1000, G1500, and VSP F1500 Hardware Guide
Table 34 Input power specifications
Input Steady
Current Current
1
PDUs
7.18A 3.59A
2.07A 1.04A
2.61A 1.31A
2.83A 1.42A
3
Appendix C: Electrical specifications
Inrush Current
Leakag
e 1st (0-
2
Current p)
0.28mA 20A
1.75mA 25A
1.75mA 25A
2.8mA 20A
1st (0-p)
2nd (0- Time
p) (-25%)
15A 80ms
20A 150ms
20A 150ms
10A 80ms
140