Installing The Release Sheet; Bun Thickness Compression Knob Settings; P/N 1011271 Rev. A - Roundup VCT-2 Manual

INSTALLING THE RELEASE SHEET

The Release Sheet allows buns to pass through the
toaster without sticking. The toaster should never be
operated without a clean Release Sheet installed.
1
Remove the Bun Feeder. Install the Release Sheet evenly over the platen.
Reinstall the Bun Feeder.
BUN THICKNESS COMPRESSION
KNOB SETTINGS
The toaster uses two Bun Thickness
Compression Knobs for proper toasting
of buns (heels and crowns).
For best results, set both Bun Thickness
Compression Knobs to 4.
The compression settings range from
1 to 6. Setting 1 is the thinnest setting
and Setting 6 is the widest setting.
abrasive cleansers or tools such as scrub-
bers or scrapers on the Platen. Damage to
the Platen from operation without a Release
6
WARNING
Do NOT operate the toaster without the
release sheet installed. Do not use any
Sheet or damage caused from abrasive
cleansers or tools voids the warranty.

P/N 1011271 Rev. A 06/14