Specifications - CareFusion Alaris PK Plus MK4 8005PK201 Directions For Use Manual

Specifications

Infusion Specifications
Maximum infusion rate can be set as part of the configuration.
0.1ml/h - 150ml/h 5ml syringes
0.1ml/h - 300ml/h 10ml syringes
0.1ml/h - 600ml/h 20ml syringes
0.1ml/h - 900ml/h 30ml syringes
0.1ml/h - 1200ml/h 50ml syringes
Infusion Rate Increments:
Rate Range (ml/h) Single Chevron Key Increments (ml/h)
0.10 to 9.99
10.0 to 99.9
100 to 999
1000 to 1200
The Volume Infused range is 0.0ml - 9990ml.
Bolus Specifications
Selected maximum rates are shown below
150ml/h 5ml syringes
300ml/h 10ml syringes
600ml/h 20ml syringes
900ml/h 30ml syringes
1200ml/h 50ml syringes
The default bolus volume can be set as part of the configuration.
• Minimum: 0.1ml
• Maximum: 100.0ml
• Increments of 0.1ml; default 5.0ml
During BOLUS the pressure limit alarms are temporarily increased to their maximum level.
Bolus Volume Accuracy*
Selected maximum rates are shown below
Bolus Volume Typical
0.1ml 1.9%
25ml 0.2%
* - Using BD Plastipak 50ml syringe at 5ml/h under normal conditions (95% confidence / 95% of pumps)
Critical Volume
The bolus which can occur in the event of a single internal fault condition with a 50 ml syringe is :
Purge Specifications
The purge rate is limited to the maximum rate for the syringe and can be set as part of the configuration.
100ml/h - 500ml/h.
The purge volume range is 0.5ml - 5ml.
During PURGE the pressure limit alarms are temporarily increased to their maximum level.
End Of Syringe Rate
Stop, KVO (0.1ml/h to 2.5ml/h), or set rate if lower than KVO.
Near End Of Infusion Alarm
1 minute -15minutes to end of infusion, or 10% of syringe volume, whichever occurs later.
0.01
0.1
1
10
Typical Maximum Typical Minimum
6.2% -7.3%
0.5% -0.1%
1000DF00741 Issue 5
Double Chevron Key Increments (ml/h)
0.10
1.0
10
100
Pump Specification
± 10%
± 5%
33/52
Alaris™ PK Plus Syringe Pump
Specifications
Maximum Overinfusion - 0.87ml.