Table of Contents
Advertisement
The instrument is fitted with integral electrical
connectors for insertion of the sensors. If the contacts
accidentally become wet, open the jaws with the blue
lever and insert a dry tissue or Palintest Contact Drying
Stick (CS 160). Wait a few seconds until it absorbs the
water, then remove and insert the opposite end to
check the contacts are dry. A dry 'Contact Drying Stick'
may also be used to clean the contacts.
Adjusting Optional Settings and Data Handling
(Set-Up Mode)
The ChloroSense is designed for simplicity of use in the
field. The user selectable options are only accessed when
linked to the PC. Once selections have been made, these
are stored in memory, and applied to each reading. A
group of instruments can be coordinated, and the settings
cannot be changed accidentally, or without supervisor
intervention.
11
Advertisement
Table of Contents
