Table of Contents
Advertisement
Technical Specification – Sensors
Sensor Type
Calibration
Packaging
Storage Life
Storage Temp 2° C – 20° C (35° F – 68° F)
Calibration Check Standards
Traditional surrogate check standards based on
permanganate or iodate are not suitable for use on the
ChloroSense.
Real chlorine standards may be produced from calcium
hypochlorite.
Certified electronic standards may be obtained from
Palintest Ltd in the Chlorine Check Standards Kit (CS 180).
Power Supply
The ChloroSense is designed to operate on alkaline
batteries. The instrument features an automatic battery
condition check as part of the analysis cycle. If the batteries
require replacement a 'Low Battery' warning message
appears. The message can be cleared by pressing
Disposable, single-use, chrono ampere-
metric sensor
Pre-calibrated during manufacture
Individually packed in sealed foil
Two years
.
23
Advertisement
Table of Contents
