Set Time/Set Date/Date Format; Time Out - palintest Photometer 7500 Operation Manual

5.12 Set Time/Set Date/Date Format

All test results are recorded automatically in the Data Log and
appended with date and time (plus additional information).
Date and time are stored on an internal clock, supported by a
coin cell battery.
To correct the time select Set Time from the System menu.
Use the up/down keys to adjust the hour; press the right key
to select and adjust the minutes.
Press OK when the correct time is set.
To correct the date select Set Date from the System menu.
Use the up/down keys to adjust the day/month/year, using the
left/right keys to select the field.
Press OK when the correct date is set.
The Date Format can be set to DD/MM/YYYY or
MM/DD/YYYY as required. To select the required format
highlight the desired choice and press OK.

5.13 Time Out

When operating using battery power the Photometer 7500
Bluetooth provides automatic power-off as a power-saving
measure. Three settings are provided:
Normal
Long
Off
The time intervals begin after the last key is pressed or
activity takes place.
5 minutes
15 minutes
(disables Time Out)
26