Instrument Operation - palintest ChloroSense CS 100 Instructions Manual

INSTRUMENT OPERATION

The ChloroSense has three operating modes, the
ANALYSIS mode, the SET-UP mode and the TEST mode.
The instrument automatically engages SET-UP mode
when connected to a PC, and ANALYSIS mode when
battery powered and not connected to a PC.
To access the TEST mode, see the calibration check
standards instructions.
ANALYSIS Mode – for Testing Water Samples
Start-Up
1 Press and hold the power
button
is displayed.
Ensure the calibration code
shown on screen matches with
the number on the foil of the
batch of sensors in use.
To accept the calibration,
press the
To change the calibration,
press the
until the title screen
button.
button.
5