Controlling The Camera Of One Of The Other Participants - Cisco TelePresence EX60 User Manual

38 Video conferencing

Controlling the camera of one of the other participants

Tap the participant
whose camera you
want to control..
Then tap Camera, as outlined.
This will invoke the Camera
control dialog box, whose use
is explained in "Controlling
the camera of the other
participant" on page 26.
About camera control
Within video conferencing the term
far end is often used to refer to the
one you are talking to.
Far end is an ambiguous term in
video conferencing, since there is
more than just one far end.
Consequently, you must start by
defining whose camera you are
going to control.
Once you have defined this, the
procedure is identical to the one
explained in "Controlling the camera
of the other participant" on page
26.
The ability to control a far end
camera requires that the far
end system camera is remotely
adjustable. The feature cannot be
applied to systems with a manual
camera adjustment.
You will not have access to any
presets that may exist on the far end
video system.
D15016.07 User Guide Cisco TelePresence
EX60, EX90
Produced: October 2013 for TC6.3
All contents © 2010–2013
Cisco Systems, Inc. All rights reserved.