Moving The Self-View Pip - Cisco TelePresence EX60 User Manual

27 Point-to-point video calls

Moving the self-view PiP

Tap the Self-view icon, as
outlined to invoke the self-view,
if needed.
Once you reach the
location you want to
have it in, lift your finger
from the touch screen.
Press and hold your
finger within the self-
view area, as outlined.
The self-view will now assume
the new location.
As soon as it turns blue
drag the self-view to the
new location. Possible
locations are indicated,
as outlined.
Why move the self-view?
The self-view shows what others
see from your video system. You will
normally use it to confirm that they
see what you want them to see.
The self-view appears as a PiP
(Picture-in-Picture).
From time to time you may want to
have the self-view activated during
the meeting.
It may happen that the current
position of the self-view blocks
important parts of the image on your
screen. You may therefore want to
move it.
D15016.07 User Guide Cisco TelePresence
EX60, EX90
Produced: October 2013 for TC6.3
All contents © 2010–2013
Cisco Systems, Inc. All rights reserved.