Controlling The Camera - Cisco Service Manual Service Manual

Cisco TelePresence SX20 Quick Set
Contents

Controlling the camera

You can control the camera using the Call Control page.
Click the Camera Control button to open the window where
you can pan, tilt and zoom the camera, and apply camera
presets.
D14908.02 SX20 Administrator Guide TC6.0, JANUARY 2013.
Introduction Web interface Web interface
Navigate to: Call Control > Call Control
Pan and tilt
Use the left and right
arrows to pan the camera,
and the up and down
arrows to tilt it.
Zoom
Use + and -
out.
System settings
to zoom in and
18
Setting passwords
Camera presets
If a camera preset is
defined it is listed here.
Apply the preset by clicking
its name.
www.cisco.com — Copyright © 2012-2013 Cisco Systems, Inc. All rights reserved.
Administrator Guide
Appendices