Administrator Settings-Sip - Cisco TelePresence EX60 User Manual

67 Managing the Settings
Administrator Settings—SIP
To exit
Administrator
Settings, tap
Back.
To exit Settings
as such, tap
Exit.
Note that there
is no Cancel
function letting
you exit the
menu undoing
any changes you
have made.
Take care!
To enter the Administrator Settings, you
must tap Administrator, located below
Restart, as outlined. This will take you to the
Administrator Settings right away.
Note that access to these settings may have
been password protected by your Video
Support Team.
About SIP Settings
Use this page to set up SIP.
Caution! There is no Cancel
function letting you exit the menu
undoing any changes you have
made. Take care!
D15016.07 User Guide Cisco TelePresence
EX60, EX90
Produced: October 2013 for TC6.3
All contents © 2010–2013
Cisco Systems, Inc. All rights reserved.