In Call With Two Parties, But One At A Time - Cisco TelePresence EX60 User Manual

21 Point-to-point video calls

In call with two parties, but one at a time

Assume that
you are in a
call. Tap Hold,
as outlined.
Place the call in the
usual way.
Tap + Place New Call, as
outlined, or tap Resume to go
back to the one you were in
call with (to undo your action).
Tap Swap to change
whom to talk to, or tap
Transfer to connect the
two together while you
leave the call.
Locate
whom to
call in the
usual way.
About this feature
This feature allows you to be in a call
with two parties, but one at a time
only.
You may swap whom you are in call
with, and you may connect the two
together, while you leave the call.
D15016.07 User Guide Cisco TelePresence
EX60, EX90
Produced: October 2013 for TC6.3
All contents © 2010–2013
Cisco Systems, Inc. All rights reserved.