Control The Camera Of The Other Participant - Cisco MX200 User Manual

52 Camera

Control the Camera of the Other Participant

In a call, tap the avatar
representing the other
participant.
In a video conference with
several participants, tap
the avator representing the
participant whose camera
you want to control.
Tap anywhere outside
the menu to exit, as
outlined.
Pan
Tilt
Zoom
Tap Camera, as
outlined
Adjust the camera's pan,
zoom and tilt.
About Camera Control
Within video conferencing the term
far end is often used to refer to the
one you are talking to.
Likewise, the term near end is often
used to refer to your side of the
video meeting.
The ability to control the far end
camera requires that the far
end system camera is remotely
controllable. The feature cannot be
applied to systems with a manual
camera adjustment.
You will not have access to any
presets that may exist on the far end
video system.
D1458221 User Guide Cisco TelePresence
Profile Series, Codec C-series, Quick Set C20
SX20 Quick Set, MX200, MX300
Produced: December 2014 for TC7.3
All contents © 2010–2014
Cisco Systems, Inc. All rights reserved.