Two Calls At The Same Time (But Only One At A Time - Cisco Telepresence System EX60 User Manual

Cisco Telepresence System EX60
Contents Introduction

Two calls at the same time (but only one at a time)

Presentation button
appears when a
presentation
source is
connected and
active only.
You will now be in a call with the second
participant, while the first one is on hold.
In this example, you talk to Berlin Sales
Office East, while Berlin Sales Office is
on hold.
D14779.04 User guide EX60, TC4.2, July 2011
All contents are Copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Connecting EX60
In a call tap Hold to ... then tap Search
put the current call on or Dial, Favorites,
hold ...
Directory, or History ...
Click on the participant
currently on hold (here
Berlin Sales Office) to
be offered swapping of
the calls or transferring
the call on hold to
someone else.
Using EX60 Using EX60 The settings
Transfer is available to SIP calls only and the
procedure is shown on the next page.
15
Web interface Contact us
... then place the call in the usual manner (here
by means of History as an example). See
the previous pages for details on this, if
Click on the
participant you
currently talk to
(here Berlin Sales
Office East) to
terminate or transfer
that call.
www.cisco.com
User guide
needed.