Two Calls At The Same Time - Cisco Telepresence System EX60 User Manual

Cisco Telepresence System EX60
Contents Introduction

Two calls at the same time

In a call tap Hold to
put the current call on
hold ...
You will now be in a call with the second
person, while the first one is on hold.
In this example, you talk to Peer Gynt,
while Berlin Sales Office is on hold.
D14779.05 User guide EX60, TC5.0, November 2011.
All contents are Copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Connecting EX60 Using EX60 Using EX60

... then tap add (
Click on the person
currently on hold (here
Berlin Sales Office) to
be offered swapping of
the calls or transferring
the call on hold to
someone else.
15
Scheduled meetings


), followed by ... then tap the entry to be called (
Favorites, Directory, or

History ( ) ...
Transfer is available to SIP calls only and the
procedure is shown on the next page.
User guide
The Settings Contact us



) and

finally tap Start ( ) to place the call.
If your EX60 is equipped with
the optional Multiway feature
you may also set up a video
conference with more than two
participants. See "Calling more
than one" on page 1817.
Click on the person
you currently talk to
(here Peer Gynt) to
terminate or transfer
that call.
www.cisco.com