Contact Switch (Optional); Electrical Connections; Wiring Diagram - Gemini 953 Installation And Use Manual

5.0 - ELECTRICAL CONNECTIONS

CAUTION
The tables below refer to the standard wiring harness (KITCA 417).
For a complete list of model-specific wiring harnesses, please visit:
www.gemini-alarm.com (private area).
Pos. Wire colour
- 1 - Brown
- 2 - Brown
- 3 - White-Violet Device learning push-button input
- 4 - Green-Brown
- 5 - ---
- 6 - ---
- 7 - Yellow
- 8 - Black
- 9 - Green
- 10 - Grey
- 11 - White
- 12 - White-Grey
- 13 - Orange
- 14 - Red
- 15 - Orange
- 16 - Black
ENGINE CUT-OFF - cut wire
Wire colour
White Connect to ignition key switch cut end
Connect to vehicle electric system cut wire
Grey
ENGINE CUT-OFF - grounded wire
Wire colour
Connect to vehicle continuous negative
White
(do not connect to vehicle frame
C onnect to the cable end which, if earthed, will cut
White/Grey
Page 19
Wire function
Electronic key ground
Ground
Contact switch input
Not applicable
Not applicable
Ignition
LED negative output
Electronic key input
Engine cut (N.C.)
Engine cut (Com.)
Engine cut (N.O.)
Turn indicators
Positive
Turn indicators
Antenna
Connection
Connection
)
the engine

6.0 - WIRING DIAGRAM

16 15 14 13 12 11 10 9
8 7 6 5 4 3 2 1
Orange
15A
Turn indicator
Orange
connections
15A
Seat t / opcase
Installation
contact switch
reco m nded m e
Green/Brown
Ground
Optional fuse (recom ended m )
Red
10A
Brown
Vehicle
Battery
12 Volt
battery
Ignition key
Electronic key
Receptacle
with built-in LED
Engine cut-off
Grey
White/Grey
White
Green/Black
Brown
Yellow
Page 20