Table of Contents
Advertisement
BURNERS AND PAN SUPPORTS
These parts can be removed and cleaned with appropriate products.
After cleaning, the burners and their flame spreaders must be well dried and correctly
replaced.
It is very important to check that the burner flame spreader and the cap have been correctly
positioned. Failure to do so can cause serious problems.
Check that the electrode "S" (figs. 3.3, 3.6) next to each burner is always clean to ensure
trouble-free sparking.
Check that the probe "T" (figs. 3.3, 3.6) next to each burner is always clean to ensure
correct operation of the safety valves.
Both the probe and ignition plug must be very carefully cleaned.
Note: To avoid damage to the electric ignition do not use it when the burners are not
in place.
IMPORTANT WARNING
NEVER unscrew the burner plate fixing screws (fig. 3.1).
The burner plates can be removed ONLY by an authorised service agent.
Damage to the appliance will occur if not observing this condition and this may
result in serious injury to the user.
The manufacturer declines every responsibility for any inconvenience resulting
from the inobservance of this condition.
Fig. 3.1
12
Advertisement
Table of Contents
