Technical Data - Graco 255751 Instructions Manual

Electronic metered dispense valves
Hide thumbs Also See for 255751:
Table of Contents

Advertisement

Technical Data

Flow range*
Maximum Working Pressure
Units of Measure
Weight
Dimensions without extension/nozzle
Length
Width
Height
Inlet
Outlet
Operating temperature range
Storage temperature range
Battery**
Wetted parts
Fluid compatibility
Pressure loss
Accuracy†
Units of measurement
Maximum totalizer amount
Maximum recorded dispensed volume
Maximum preset volume (LDP5 Meter only)
* Tested in No. 10W motor oil. Flow rates vary with fluid pressure, temperature and viscosity.
** Battery required to meet safety approvals: Duracell
† At 2.5 gpm (9.5 lpm), at 70°F (21°C), with 10W motor oil and 1 gallon (3.8 l) dispensed. May require calibration;
out-of-box accuracy is +/-1.25 percent.
®
Duracell
is a registered trademark of Duracell Inc.
®
Eveready
is a registered trademark of the Eveready Battery Co., Inc.
312668D
01 to 5 gpm (0.4 to 19 lpm)
1000 psi (69 bar)
pints, quarts, gallons, liters (factory set to quarts)
3 lbs (1.36 kg)
11 inches (28 cm)
3.25 inches (8.3 cm)
3.25 inches (8.3 cm)
3/8" npt
1/2" npt
32°F to 120°F (0°C to 49°C)
-30°F to 120°F (-34°C to 49°C)
9 volt alkaline
stainless steel, nitrile rubber, zinc, CS, LCP
lubricating oils, antifreeze mixtures
90 psi (1.2 bar) @ 5 GPM
+/- 0.5 percent
factory set in quarts
99,999 units
999.99 units
99.99 units
®
®
MN1604 or Eveready
Technical Data
EN22, 522
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ldp5Ldm5256215255277256216

Table of Contents