Copying Files From A Pc To The I9000 - Honeywell Intelliguard 9000 Programmer's Manual

COPYING FILES FROM A PC TO THE I9000

74-3046
Program the I9000 by editing files in a PC and then copying them to the I9000
Control Unit. Transfer information from the PC to the I9000 Control Unit through a
shielded RS-232 cable.
1. Connect the cable to the PC and the I9000.
2. Click Special to display the Special pull-down menu. See Fig. 16.
NOTE: Write XSM File, Forget changes, and Check program are not available at
this time.
Fig.16. Main menu with Special pull-down menu selected.
28
INTELLIGUARD 9000