Defining System Messages Table; Adding A Message - Honeywell Intelliguard 9000 Programmer's Manual

INTELLIGUARD 9000
Figure 9. System Messages table. User programs individual messages for display on CC-2.
The Messages table defines customer messages that display on the Keypad Control
Center (CC-2) after each input. I9000 accepts a maximum of 30 custom defined
messages. Sample messages may include a device or point name, a specific
circumstance, or any other relevant information. The Inputs, Outputs, and Polling
tables accept only messages listed in the Messages table.
1. Press F4 to display the System Messages table. See Fig. 9.
2. Click the line chosen line for inserting the new message. This table allows
entries in either English or French.
3. Type the message.
4. Tab to the next field.
NOTE: PRO9000 saves a field entry only when the cursor moves to the next field.
5. Click OK.
6. Click File to display the File pull-down menu.
7. Click Save to save the new message.
17

Defining System Messages Table

Adding a Message

74-3046