Defining Output Points Table - Honeywell Intelliguard 9000 Programmer's Manual

Defining Output Points Table

74-3046
Opt.(ions) Sum of all options selected for this point. For example, if the point
has bypass and force arm capabilities, add that to the value for
local only (not to XSM). Bypass = 1, force arm = 2, annunciation for
CC-2=8, sound for CC-2=16, local=32. 1+2+8+16+32=59, so 59 is
the required number in the Opt. field.
The Input points table has eight buttons for moving through and editing its fields:
Go to Allows the screen display to move to a specific input device
number.
Begin Moves the display to the first input device.
End Moves the display to the last input device.
OK Accepts changes made in the panel.
Delete Deletes the device entry but leaves the fields for other entries.
Insert Inserts one line, moving succeeding points back one.
Remove Removes one point. All points move forward one.
Messages Displays the Messages panel.
2. Program the first input point by tabbing to each field and adding the required
information for that device.
3. Repeat step 2 for each additional input you want to program.
4. Click OK to accept the entries.
5. Click File to display the File pull-down menu.
6. Click Save to save the entries.
The Outputs table defines outputs a function activates. Outputs are available with
the BIC-2, BIC-2HU, BIC-6, MOM, and ISP. The Output points panel has four
buttons for editing information in the panel.
1. Press Alt+F1 to display the Output Points table. See Fig. 15.
Fig. 15. Output Points table.
26
INTELLIGUARD 9000