Honeywell 9000 Product Information

Product
Information

Quick reference

*Settings and display will vary depending on whether thermostat is set for
residential or business. Search online for Honeywell 69-2814EFS for the User
Guide to see all options.
Connecting to your Wi-Fi network
1. If thermostat is asking if you want to connect to a Wi-Fi network,
touch Yes. If thermostat is not asking if you want to connect to a Wi-Fi
network, Touch MENU > Wi-Fi Setup.
2. Touch the name of the network you want to use. The thermostat
displays a password page.
3. Using the keyboard, touch the characters that spell out your home
network password.
NOTE: If your home network is not shown on the list, touch Rescan.
4. Touch Done. The thermostat displays "Connecting to your network.
Please wait..." then shows a "Connection Successful" screen.
5. Touch Next to display the registration information screen.
6. Note your Thermostat MAC and Thermostat CRC. You need these
numbers to complete online registration.
Disconnecting your Wi-Fi network
If you need to disconnect the thermostat from your Wi-Fi network (for
example, you're replacing your router), follow these steps:
1. Touch MENU.
2. Select Wi-Fi Setup.
3. Touch Disconnect from Network. The thermostat will display a question to
confirm your selection.
4. Touch Yes to confirm that you want to disconnect from the network.
5. Touch OK to display the menu.
HOME. Touch to display Home
screen.
FAN. Select fan mode.
SYSTEM. Select system mode
(heat/cool).
MENU. Touch to display options.
Start here to set a program schedule.
*Thermostat location. Quickly
identify which thermostat is in
control of a specific area.
Current schedule. Touch an arrow
to change temperature setting and
set a temporary hold.
*Override. Touch to temporarily
override the program schedule.
Indoor conditions. Shows indoor
temperature and humidity.
Current date and time.
Current status. Shows system mode
(heat/cool).
Outdoor conditions. Outdoor
temperature and humidity appear
after registration.
Wi-Fi® Thermostat
9000
color
touchscreen
Reconnecting your Wi-Fi network
1. Touch MENU.
2. Select Wi-Fi Setup.
3. Touch the name of the network you want to use. The thermostat may
display a password page.
4. To enter a password, touch characters to spell out your home network
password, then touch Done.
5. The thermostat displays "Connecting to your network. Please wait..."
then a "Connection Successful" screen.
6. Touch Next.
• If your thermostat is registered, you will see your signal strength
and other status information. Touch Done.
• If the screen displays "Register Online for Remote Access," follow
instructions on page 3 in 69-2814EFS.
Setting the time/date
1. Touch the current time. The screen displays Set Time/Set Date.
2. Touch Set Time or Set Date.
3. Touch or until the proper time/date is displayed.
p q
4. Touch Done to save or Cancel to ignore changes.

Setting system mode

1. Touch SYSTEM to display system settings.
2. Touch desired option: Heat, Cool, Off, Automatic, Emergency Heat
(heat pumps with aux. heat).
3. Touch Done to save and exit.
NOTE: The Automatic and Emergency Heat system settings may not appear,
depending on how your thermostat was installed.

Adjusting program schedules

1. Touch MENU.
2. Select Create/Edit Schedule.
• Touch View/Edit to view the full schedule and make a quick
adjustment.
• Touch Guide Me to create a schedule by answering simple questions.
Product Manuals
Search online for Honeywell 69-2814EFS for the User Guide.
Videos
Search online for Wi-Fi Thermostat 9000.
Need Help?
For assistance please visit http://yourhome.honeywell.com, or call toll-
free: 1-800-468-1502.
33-00311EFS-01