Table of Contents
Advertisement
Programming Examples
Working with the LCA
If your version of VEE version can use .NET assemblies, we
recommend you reference the LCA Remote Client .NET
assembly directly, as described here.
If you have an older version of VEE which cannot use .NET
assemblies, you need to reference the Active X interface of the
LCA Remote Client. This is not described here, but is similar to
referencing the PNAProxy, which is described later in this
example.
1 After having opened VEE, in the "Device" menu, select ".NET
Assembly References".
Figure 2
Calling the .NET Assembly references
Keysight N437x Series Lightwave Component Analyzer, Programmer's Guide
63
Advertisement
Table of Contents
