Keysight Technologies N7373C Programmer's Manual page 13

N O TE
N O TE
N O TE
N O TE
N O TE
Keysight N437x Series Lightwave Component Analyzer, Programmer's Guide
By default, as the instrument starts up, you are logged on as an
administrator with the logon name PNA-Admin. The login password,
which is usually not needed, is "pna" for systems with Windows 7 or
"agilent" for systems using Windows XP.
Keysight only recommends using the LCA application while you are logged
on as an administrator.
You can change network settings by using the standard
Microsoft® Windows functions.
To view or change the computer machine name
1 On the Task bar, click
.
Control Panel
2 Double-click the
System
tab. From here you can view or change the machine name.
3 When you have finished making changes, restart the
instrument.
To configure TCP/IP to use DNS or WINS
If using a protocol other than TCP/IP, please contact your IT department
for assistance.
Editing your instrument's protocols and file access permissions can result
in unwanted behaviors that are difficult to reverse. Ensure that your
changes are valid!
Please consult with your network administrator concerning advanced
TCP/IP and multi-protocol configuration settings to support your network.
Please contact your network administrator or IT department if you have
any problems connecting the LCA to your network.
4 On the Task bar, click
Network and Dial-up Connections.
5 Then click
Local Area ConnectionProperties
6 On the tab (for a local area connection) or the
General
tab (all other connections), click I
Networking
, and then click
(TCP/IP)
all desired changes.
, point to
Start Settings
icon and click on the
, point to
Start Settings
.
. From here, you can make
Properties
Remote Operation
, and then click
Computer Name
, and then click
nternet Protocol
13