Keysight Technologies N7373C Programmer's Manual page 50

Remote Operation
50
Triggers a measurement on the LCA. If you call a continuous measurement
description:
while another measurement is running, the original measurement is stopped
without starting a new measurement
parameters:
<string> SINGle | CONTinuous
response:
none
(method) Measure()
C#:
example:
:MEAS:STAR CONT
:NWA:MODel?
command:
:NWA:MODel?
syntax:
The model number of the network analyzer
description:
parameters:
none
response:
string
(property) NWAModel
C#:
example:
:NWA:MOD? -> N5245A
:NWA:PORT:NUMBer?
command:
:NWA:PORT:NUMBer?
syntax:
The number of network analyzer ports
description:
parameters:
none
response:
integer
(property) NumNWAPorts
C#:
example: :NWA:PORT:NUMBer? -> 4
command:
*OPC?
syntax:
*OPC?
description:
Retrieves the operation complete state
parameters:
none
response:
<string> 0 | 1
(method) OperationComplete()
C#:
example:
*OPC? -> 1
:PARameter:ADVAnced:MODE?
command:
:PARameter:ADVAnced:MODE?
syntax:
Returns 1 if advanced mode is enabled. In advanced mode you
description:
can force the LCA to switch the laser on or off, independent of
the measurement type. You also have additional optical- and RF-
path de-embedding possibilities, or can apply additional de-
embedding on the receiver and the source side, independent of
the measurement type.
parameters:
none
response:
<string> 0 | 1
(property) Advanced
C#:
example:
:PAR:ADVA:MODE? -> 0
:PARameter:ADVAnced:MODE
command:
:PARameter:ADVAnced:MODE<wsp>ON | OFF | 1 | 0
syntax:
Enables or disables advance mode, which allows changing some
description:
default settings. In advanced mode you can force the LCA to switch
the laser on or off, independent of the measurement type. You also
have additional optical- and RF-path de-embedding possibilities, or can
apply additional de-embedding on the receiver and the source side,
independent of the measurement type.
parameters:
<string> ON | OFF | 1 | 0
response:
none
(property) Advanced
C#:
example:
:PAR:ADVA:MODE ON
Keysight N437x Series Lightwave Component Analyzer, Programmer's Guide