Keysight Technologies N7373C Programmer's Manual page 54

Remote Operation
54
:PARameter:OPTical:RECeiver:S2PFile?
command:
:PARameter:OPTical:RECeiver:S2PFile?
synstax:
Returns the name of the s2p file to use for additional adaptor de-
description:
embedding on the receiver side. In default mode, only evaluated for E/O
and O/O measurements.
parameters: none
response: <string> path and file name
C#:
(property) OptRcvFile
example:
:PAR:OPT:REC:S2PF? -> c:\temp\test1.s2p
:PARameter:OPTical:RECeiver:S2PFile
command:
:PARameter:OPTical:RECeiver:S2PFile<wsp>"<path string>"
syntax:
Sets the name of the s2p file which is used for additional adaptor de-
description:
embedding on the receiver side. In default mode only evaluated for E/O
and O/O measurements.
"<string>" file name and path enclosed in double quotes
parameters:
response:
none
C#:
(property) OptRcvFile
example: :PAR:OPT:REC:S2PF "c:\temp\test1.s2p"
:PARameter:OPTical:S2PFile:USE?
command:
:PARameter:OPTical:S2PFile:USE?
syntax:
Returns whether the optical paths are described by transmission data
description:
stored in an s2p file. Only the S21 transmission data is used
none
parameters:
response: <string> 1 = s2p file use enabled, 0 = disabled
C#: (property) UseIOpticalS2PFile
example: :PAR:OPT:S2PF:USE? -> 0
:PARameter:OPTical:S2PFile:USE
command:
:PARameter:OPTical:S2PFile:USE<wsp>ON|1|OFF|0
syntax:
enables or disables description of the optical paths by transmission data
description:
stored in an s2p file. Only the S21 transmission data is used
<string> ON | 1 = s2p file use enabled, OFF | 0 = disabled
parameters:
none
response:
C#: (property) UseIOpticalS2PFile
example: :PAR:OPT:S2PF:USE ON
:PARameter:OPTical:SOURce:S2PFile?
command:
:PARameter:OPTical:SOURce:S2PFile?
syntax:
Retrieves the name of the s2p file to use for additional adaptor de-
description:
embedding on the source side. In default mode only evaluated for O/E
and O/O measurements.
parameters:
none
response:
<string> file name and path of the s2p file on the LCA system.
C#:
(property) OptSrcFile
example:
:PAR:OPT:SOUR:S2PF? -> c:\temp\test1.s2p
Keysight N437x Series Lightwave Component Analyzer, Programmer's Guide