Keysight Technologies N7373C Programmer's Manual page 29

Property Description
ElSrc1File The name of the s2p file to use for electrical adaptor
deembedding.
This property has to be used for source side deembedding in
single ended measurements or for the source port with the
lower number in differential measurements.
ElSrc2File The name of the s2p file to use for electrical adaptor
deembedding.
This property has to be used only for the source port with
the higher number in differential measurements.
CalSetUserCal Name a Calset on the network analyzer which has to be
used for the user calibration measurement.
If an empty string is passed, the current calset is used.
If "NONE" is passed, no calset is applied for the user
calibration measurement.
Keysight N437x Series Lightwave Component Analyzer, Programmer's Guide
Remote Operation
Type Default value
String Empty string
String Empty string
String Empty string
29