Keysight Technologies N7373C Programmer's Manual page 57

Keysight N437x Series Lightwave Component Analyzer, Programmer's Guide
:PARameter:SOURce:PATH:LENGth
command:
:PARameter:SOURce:PATH:LENGth<wsp><length>
synstax:
Specifies the geometrical length of the source path in m. In
description:
default mode only evaluated for O/E and O/O
measurements
length <double> the path length value, default unit is
parameters:
meter.
response:
none
C#:
SrcLengthOpt_m
example:
:PAR:SOUR:PATH:LENG 0.42
:PARameter:SOURce:REFR:INDex?
command:
:PARameter:SOURce:REFR:INDex?
syntax:
Retrieves the refractive index of the source path in dB. In default
description:
mode only evaluated for O/E and O/O measurements.
none
parameters:
<double> the refractive index
response:
C#:
(property) SrcRefIdx
example:
:PAR:SOUR:REFR:IND? -> 0
:PARameter:SOURce:REFR:INDex
command:
:PARameter:SOURce:REFR:INDex<wsp><index>
syntax:
Specifies the refractive index of the source path in dB. In
description:
default mode only evaluated for O/E and O/O
measurements.
parameters: index <double> the refractive index value in dB
response: none
C#:
(property) SrcRefIdx
:PAR:SOUR:REFR:IND 0.13
example:
:PARameter:USER:CALIbration:CALSet?
command:
:PARameter:USER:CALIbration:CALSet?
syntax:
Retrieves the name of a Calset on the network analyzer to be
description:
used for the user calibration measurement. If an empty string is
returned, the current Calset is used. If "NONE" is returned, no
Calset is applied for the user calibration measurement.
none
parameters:
response: <string> NONE | path and file name
C#: (property) CalSetUserCal
example:
:PAR:USER:CAL:CALS? -> c:\temp\calset1.s2p
:PARameter:USER:CALIbration:CALSet
command:
:PARameter:USER:CALIbration:CALSet<wsp>[NONE | "<path
syntax:
string>"]
Specifies the name of a Calset on the network analyzer to be used for
description:
the user calibration measurement. If an empty string is passed, the
current Calset is used. If "NONE" is passed, no Calset is applied for
the user calibration measurement.
parameters:
NONE| <string> |No argument, None or the path and file name
surrounded by double quotes.
response:
none
C#:
(property) CalSetUserCal
:PAR:USER:CAL:CALS "c:\temp\calset1.s2p"
example:
:PARameter:WAVelength?
command:
:PARameter:WAVelength?
syntax:
Returns the laser wavelength set on the LCA.
description:
parameters:
none
response:
<string> The wavelength and unit as a string.
C#:
(property) Wavelength_nm
example:
:PAR:WAV? -> Wvl_1550nm
Remote Operation
57