Software And Hardware; Hardware Needed; Figure 1: Content Of The Z-Wave Development Kit - Silicon Laboratories Z-Wave 700 How To Use Manual

INS14278-4

3 SOFTWARE AND HARDWARE

This section will present the hardware that comes as part of the development kit and the needed
software to start developing Z-Wave devices. For a guide in how to setup and connect the hardware,
refer to [10].
3.1

Hardware Needed

The Z-Wave development kit contains the following:

WSTK Main Development Board, 2 pcs.

BRD4200A Radio Board with ZGM130S intended end device development, 2 pcs.

BRD8029A EXP Board, 2 pcs.

UZB7 Controller USB Dongle

Zniffer USB Dongle
silabs.com | Building a more connected world.
How to Use Certified Apps in Z-Wave 700

Figure 1: Content of the Z-Wave Development Kit

2019-03-22
Page 7 of 45