Advertisement
8. R
EMOVE THE
STEP 1: Loose 2*screws and open the battery cover from bottom of AT-170 as Figure 7.
STEP 2: After removing the bottom cover, pull up the battery connector as below Figure 8 to
change a new battery.
Bottom Cover Removal Warning
When removing the bottom cover and screws for the purposes of changing battery, remember to put
back the cover and screws before power on the POS.
CAUTION:
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS.
Warning for internal battery pack
To reduce risk of fire or burns:
1.
Do not attempt to open, disassemble, or service the battery pack.
2.
Do not crush, puncture, short external contacts, or dispose of in fire or water.
B
ATTERY
Figure 7
Figure 6
Figure 8
Advertisement
