Advertisement
Wireless Solar sun sensor
o
Release the Prog (3) button and press briefly once again within 10 seconds.
The Status LED flashes briefly. The device is reset to default setting.
6 Appendix
This device includes an integrated battery. At the end of its useful life, dispose of the
device together with the battery in accordance with the environmental regulations. Do
not throw device into household waste. Consult your local authorities about
environmentally friendly disposal. According to statutory provisions, the end
consumer is obligated to return the device.
6.1 Technical data
Ambient temperature
Brightness setting
Twilight setting
Temperature setting
Dimensions Ø×H
Radio frequency
Transmission capacity
Transmitting range in free field
Receiver category
6.2 Parameter list
The device parameters can be changed with the eNet server:
Device and channels
Parameter name
Function
Advanced device settings
Parameter name
Manual commissioning
Extended channel settings
Parameter name
Manual commissioning
32582922
10864960
Setting options, Basic
setting
Other modes, Unused
Basic setting: Other modes
Setting options, Basic
setting
On, Off
Basic setting: On
Setting options, Basic
setting
On, Off
Basic setting: On
24.03.2017
-5 ... +45 °C
4000 ... 80000 lx
15 ... 40 °C
868.0 ... 868.6 MHz
max. 20 mW
Explanations
Other modes
The channel works as a scene
channel
Unused
The channel is not displayed
in the eNet SMART HOME
app and is disabled for use in
the commissioning interface.
Explanations
Disables manual
commissioning for all device
channels. In the "Off" setting,
the device cannot be reset to
the factory setting.
Explanations
Blocks manual commissioning
for the device channel. In the
"Off" setting, the device
cannot be reset to the factory
setting.
5 ... 250 lx
75×27 mm
typ. 100 m
2
5/7
Advertisement
