Plug & Light
Light socket outlet, Light socket outlet with lock
Fitting the device
Recommendation: Use deep appliance box.
■
Install flush-mounted insert in appliance box so that the device connection terminals are
at the bottom.
■
Mount the frame and cover and attach the light attachment (Figure 1).
■
Switch on mains voltage.
7
Dismantling
Dismantling a light attachment is explained using an example.
Dismantling a light attachment (without interlock)
■
Remove light attachment.
Tilting the light attachment downwards will make it easier to pull out.
Dismantling a light attachment (with interlock)
The mechanical locking must be unlocked by means of a magnet (accessory).
■
Rotate the light attachment by 45° to expose the marking (9) (Figure 6).
■
Place the magnet (10) at the level of the marking (9) on the cover until a click is heard.
■
Remove light attachment.
Do not remove the magnet until the light attachment has been removed.
8
Technical data
Rated voltage
Mains frequency
Input current
Switch-on current (for 40 light sockets connected)
Power factor
Efficiency
Apparent power
82401042
Figure 5: Clampable conductor cross-section
08.04.2020
Figure 6
AC 230 V~
50 / 60 Hz
typ. 75 mA
max. 156 A
typ. 0.6C
approx. 79%
approx. 16.2 VA
5 / 6