Commissioning With The Iop - Siemens SINAMICS G120D Getting Started

Commissioning

4.2 Commissioning with the IOP

4.2 Commissioning with the IOP
Commission the Inverter
The Intelligent Operator Panel (IOP) has been designed to enhance the interface and
communications capabilities of the SINAMICS Inverters.
The IOP is connected to the Inverter using an Optical RS232 cable. It will automatically
recognise the specific Control Unit to which it is connected, and displays only the parameters
and funtionality of the connected Control Unit.
What do you need?
The IOP Handheld Kit is a completed package that contains the necessary items to
commission and configure the Inverter utilizing the Optical Interface. The cable that is
delivered with the IOP Handheld kit is not compatible with the Optical Interface on the
G120D Inverters; the order details of the necessary cable is given below.
● The IOP Handheld Kit - order number: 6SL3255-0AA00-4HA0.
● Optical Cable - order number: 3RK1922-2BP00
Figure 4-1
48
CU240D-2 and CU250D-2 Optical Interfaces
SINAMICS G120D converter with control units CU240D-2 and CU250D-2
Getting Started, 04/12014, FW V4.7, A5E34262374B AA