Extron electronics SF 3PT User Manual page 22

2. Cut the cables using value C for the cut length.
ATTENTION: Do not use regular wire cutters to cut through the steel cable.
Ordinary wire cutters may be damaged when attempting to cut through the steel
cable. You must use a suitable cable cutter to cut the steel cable.
ATTENTION : N'utilisez pas de cisaille standard pour couper le câble en acier. Ce
type de cisaille peut être endommagé lors de la coupe du câble en acier. Vous
devez utiliser une pince coupe-câble adaptée à ce type de câble.
3. Strip 6 inches (15.2 cm) of the cable jacket from each end of the cut cable segments.
4. Proceed to the Wiring the SF 3PT Speaker Assembly
the steps until you reach the
where you will skip steps 1, 3, and 4.
Wiring the SF 3PT Ceiling Bracket
SF 3PT User Guide • Reference Information
section on page 6 and follow
section on page 10
16