Quick BTQ110 series User Manual page 16

CHARACTERISTICS
EN
BEFORE USING THE BOW THRUSTER, READ THIS INSTRUCTION MANUAL CAREFULLY.
IF IN DOUBT, CONTACT YOUR NEAREST QUICK
WARNING: Quick
Bow Thrusters have been designed and constructed only for nautical use.
®
Do not use these appliances for other uses.
Quick shall accept no responsibility for direct or indirect damages caused by improper use of the appliance or an improper
®
installation.
The Bow Thruster is not designed to maintain loads generated in particular atmospheric conditions (storms).
We recommend you entrust preparation and positioning of the tube on the hull to a skilled professional. These are generic
instructions and do not give details of the preparatory operations for installing the tunnel, since this is the competence of the
boatyard. The installer shall bear full responsibility for any problems caused by defective installation of the tunnel.
Do not install the electric motor near easily inflammable objects.
THE PACKAGE CONTAINS: bow thruster - drill template - gasket - o-ring (for assembly) - user's manual - conditions of
warranty.
TOOLS REQUIRED FOR INSTALLATION:
BTQ110 drill and drill bits Ø 6 mm (15/64"); hollow mill Ø 25 mm (1"); hexagonal male key: 4 mm, 5 mm, 6 mm;
,
fork or polygonal key: 10 mm.
BTQ125 drill and drill bits Ø 6 mm (15/64"); hollow mill Ø 25 mm (1"); hexagonal male key: 4 mm, 5 mm, 6 mm;
,
fork or polygonal key: 10 mm.
QUICK "ACCESSORIES RECOMMENDED: TCD 1022 - TCD 1042 - TCD1044 - TCD1062 - TMS - TSC - PSS - TFH3
®
MODEL
N° Propellers
Tunnel Ø
Motor Power
Voltage
Section of wire
Fuse
Thrust
Weight
Limit thickness values of the tubes
F
Quick reserves the right to introduce changes to the equipment and the contents of this manual without prior notice.
®
In case of discordance or errors in translation between the translated version and the original text in the Italian language, reference will be made to the Italian or English text.
16
DEALER.
®
BTQ1102512
110 mm (4" 21/64)
1,3 Kw
12 V
35 mm 2 (AWG 2)
130 A CNL DIN
25 kgf (55.1 lb)
9,0 kg (19.8 lb)
min. 3 mm - max 7 mm (min. 1/8" - max 9/32")
BTQ1253012
single
125 mm (5")
1,5 Kw
12 V
50 mm 2 (AWG 1)
225 A CNL DIN
30 kgf (66.1 lb)
10,0 kg (22.0 lb)
BOW THRUSTER BTQ110-125 IT EN - REV002A
BTQ1254012
125 mm (5")
2,2 KW
12 V
95 mm 2 (AWG 3/0)
325 A CNL DIN
40 kgf (88.2 lb)
10,8 kg (23.8 lb)