System / Events - Robin Compact SIP Manual

5.2.4.3 System / Events

The Robin SIP is equipped with various options for initiating actions. For example, starting an
outgoing telephone call to a predefined number, a sound signal etc.
These actions are started by an Event.
An 'Event' may be movement in the image, a loud noise that exceeds a predefined volume or when
a signal from one of the doors is sent to the Robin SIP .
You can define the various 'Events' here and set the response actions that take place when an
'Event' occurs.
Events
Define the events. Choose from:
 Call - an incoming or outgoing call
 Motion - not used
Audio - Vox detection

Dtmf - detection of the '*' & '0-9' key (e.g.: *1 or *7 etc.)

 HTTP - enable control with http commands
 Ring - during the 'Ring' state (incommoding or outgoing)
The green '+' creates a new 'Event' .
The '>>' behind a line opens the details for this 'Event'.
The red X behind a line deletes the 'Event' from the list.
gf39
Manual Robin Compact SIP ENG - v. 3.0.1
39