Robin Compact SIP Manual page 22

! Note: The number can be entered in various ways.
1. Just the number (e.g. 104, 1002, 6032 etc.). The handset is located on a connected PBX
in the same network.
2. The number, followed by the IP address of the handset that is to be dialled (e.g.
1000@10.0.0.53, 102@192.168.1.21 etc.). The handset and the Robin SIP are
connected to each other directly, i.e. the call is not routed via a PBX. The Robin SIP dials
the handset directly.
3. The number, followed by the IP address of a 'Proxy server'. The handset is connected to
a PBX that uses a separate 'Proxy server' (e.g. 1003@192.168.0.50, 703@172.16.2.5
etc.) The Robin SIP places the call to the configured PBX via this 'Proxy server'. !
* Peer to Peer connection: If a direct connection between the Robin SIP and a telephone set is
required - without the use of a SIP-PBX - please check our whitepaper: How-To_Peer-to-ENG.pdf
on the supplied USB drive or on our support website:
Profiles:
Various parameters need to be set when creating a 'Profile'.
The green '+' creates a new line.
The '>>' behind a line opens the details for this line.
The red X behind a line deletes the line from the list.
gf21
Manual Robin Compact SIP ENG - v. 3.0.1
http://support.robin.nl
21