Audio Detection - Robin Compact SIP Manual

With the echo canceler set to 'half duplex' a 'Vox level' slider appears to set the switch level of the
microphone / speaker
! Note: Tuning the 'Vox level' is necessary to establish good communication when set to 'half-
duplex'. !
5.2.2.2 Audio / Detection
The Robin SIP is capable of detecting sound.
This detection can trigger 'Actions' such as the staring of a recording, activation of a relay switch or
automatic calling to a phone set. These actions can be defined in the menu -System-Events-.
Depending of the location of the Robin SIP and the type of sound that should trigger the detection,
two parameters can be set: the volume and the duration.
Short audio spikes can be filtered by increasing the duration setting. Background noise can be
filtered by increasing the threshold.

Audio detection:

 Enabled
 Treshold
 Duration
gf28
Enable or disable the audio detection
Change the volume threshold of the detection
Change the audio duration of the detection
Manual Robin Compact SIP ENG - v. 3.0.1
28