Advertisement
Quick Links
Kennedy Three Drawer
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
C
D
A
B
locking
screw
bolt
dowel
nut x39
x39
x8
x18
M
N
O
L
plug
screw
long
wedge
x3
x4
x4
screw
x3
WARNING:
Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
mocka.co.nz | mocka.com.au
E
F
G
H
screw
slide
slide
slide
slide
x45
rail x3
rail x3
rail x3
rail x3
Q
P
R
bracket
long
screw
x4
bolt x4
x8
Hardware Supplied
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
I
J
K
cover
bracket
x3
x3
S
T
U
bolt
allen
washer
key x1
x16
x16
V
W
X
safety
screw
wall
x1
strap x1
anchor
x1
Wall Strap
Y
Z
wall
washer
x2
screw
x1
1
Advertisement
Related Manuals for Mocka Kennedy Three Drawer
Summary of Contents for Mocka Kennedy Three Drawer
- Page 1 Kennedy Three Drawer Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. safety screw wall wall washer locking screw bolt screw slide cover dowel slide slide slide bracket strap x1 anchor screw nut x39...
- Page 2 Kennedy Three Drawer Assembly Instructions The round head is aligned with the direction of the arrow Insert 6x bolts (C) into panel [1]. Attach panel [5] to panel [1] using Attach 1x bracket (J) to panel [6] and secure with 2x screws (E). Tighten 3x screws (M).
- Page 3 Kennedy Three Drawer Assembly Instructions Insert 6x bolts (C) into panel [2]. Insert 6x bolts (C) into panel [3]. Attach panels [6] and panel [8] to panels [2] and [3] using 12x locking Tighten with a screwdriver. nuts (D). Tighten with a screwdriver.
- Page 4 Kennedy Three Drawer Assembly Instructions Slide panel [7] down along the grooves between the side panels to form Attach panel [4] to panels [2] and [3] using 4x dowels (A) and secure with the back of the unit. 6x locking nuts (D). Tighten with a screwdriver.
- Page 5 Kennedy Three Drawer Assembly Instructions front back front Attach a leg bracket (P) to each leg [9] using 2x screws (R) and 1x long Attach 3x slide rails (G) to panel [3] and secure with 9x screws (E). bolt (Q). Tighten with the allen key (U) and screwdriver. Attach the leg Attach 3x slide rails (F) to panel [2] and secure with 9x screws (E).
- Page 6 Kennedy Three Drawer Assembly Instructions Slide panel [7] down along the grooves between the side panels to form Attach panel [1] using 4x dowels (A) and secure with 6x locking nuts (D). the back of the unit. Tighten with a screwdriver.
- Page 7 Kennedy Three Drawer Assembly Instructions Insert 15x bolts (C) into panels [10], [11] and [12]. Attach 3x plug (L) to Attach panel [13] ,[14] and [17] to front panel [10], [11] and [12] using 15x panels [10], [11] and [12] and secure with 3x screw (E). Tighten with a locking nuts (D).Tighten with a screwdriver.
- Page 8 Kennedy Three Drawer Assembly Instructions Slide panel [15] along the grooves between the side panels [13] and [14] Attach panels [13], [14] and [16] as shown using 6x screws (B). to form the base of the drawer. Tighten with a screwdriver.
- Page 9 Kennedy Three Drawer Assembly Instructions Attach slide rails (I) and slide rails (H) to the underside of the side panels as Insert the assembled drawers into the corresponding compartments as shown. Secure with 6x screws (E) and tighten with a screwdriver.
- Page 10 Kennedy Three Drawer Assembly Instructions Attach 4x wedges (N) into the corners of the back of the unit and secure Once assembled lift furniture into place, do not drag. Use a drill to create a small hole lining up with the top of the safety strap (V). Fasten to wall with 4x screws (O).
Need help?
Do you have a question about the Kennedy Three Drawer and is the answer not in the manual?
Questions and answers