Mocka Kennedy Side Table Assembly Instructions

Kennedy Side Table

Assembly Instructions

Thank you for your purchase.

Please follow the instructions below for correct assembly.

bolt

locking

x30

nut x30

Phillips & Flathead screwdrivers

For quicker assembly, we recommend the

use of a power drill on a low-speed setting.

WARNING:

Any furniture that is not anchored to a wall has the potential to tip over in certain

circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.

Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor

with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device

provided should fit most wall types, but please note that different wall materials may require different fixing

devices from those supplied.

mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558

felt pad

Table of Contents

Need help?

Do you have a question about the Kennedy Side Table and is the answer not in the manual?

Page 1 The fixing device provided should fit most wall types, but please note that different wall materials may require different fixing devices from those supplied. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 2 Kennedy Side Table Assembly Instructions Insert 10x bolts (A) into panel [1] and tighten with a screwdriver. Insert 10x bolts (A) into panels [2] and [3]. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 3 Attach panels [2], [3] to panel [4], secure with 4x locking nuts (B). Attach panels [5] and [6] to panels [2] and [3], secure with 6x locking nuts (B). Tighten with a screwdriver. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 4 Attach panels [2], [3], [5] to panels [1] and secure with 10x locking nuts (B). Attach panels [2] and [3] to panels [5] and [6], secure with 6x locking nuts (B). Tighten with a screwdriver. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 5 Kennedy Side Table Assembly Instructions Attach 4x felt pads (C) to panels [2] and [3]. Once assembled lift furniture into place, do not drag. You’re done, enjoy! mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...