Advertisement
Quick Links
Kennedy Entertainment Unit
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
C
D
wedge
dowel
bolt
locking
x20
x24
nut x24
x12
M
N
O
P
bracket
cover
stopper
hinge
x4
x3
x3
x3
WARNING:
Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall materials may require
different fixing devices from those supplied.
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
E
F
G
H
screw
screw
bolt
slide
x41
x5
x4
rail x1
rail x1
Q
R
S
small
screw screw
bracket
bolt x16
x4
x10
Hardware Supplied
J
I
K
L
slide
slide
slide
allen
rail x1
rail x1
key x1
T
U
A1
adjuster
washer
x12
x1
x16
V
W
X
safety
screw
wall
x1
strap x1
anchor
x1
Wall Strap
Phillips & Flathead screwdrivers required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Y
Z
wall
washer
screw
x2
x1
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Mocka Kennedy Entertainment Unit
Summary of Contents for Mocka Kennedy Entertainment Unit
- Page 1 *We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use. use of a power drill on a low-speed setting. Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 2 Tighten with a screwdriver. 1x cover (N) over the bracket. Attach the support leg [19] to the underside of panel [2] with 1x screw (F). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 3 Attach panels [4], [6], [5] and [3] to panel [1] using 8x dowels (A), 8x bolts (B). Secure with 4x locking nuts (C) and tighten with a screwdriver. (B) and secure with 8x locking nuts (C). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 4 Attach panel [2] to the rest of the unit using 8x dowels (A), 4x bolts (B) and [6] to form the back of the unit. and 4x locking nuts (C). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 5 [2] using 4x small bolts (Q) and 4x washers (A1) as shown. Tighten with the allen key (L). Insert the adjuster (U) into the middle support. mocka.co.nz | mocka.com.au mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 6 (P) with 16x screws (E) as shown. stopper (O) to door panel [12] using 1x screw (E). Attach 2x hinges (P) to panel [12] and secure with 4x screws (E). mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 7 (C). Tighten with a screwdriver. Slide panel [17] along the grooves Tighten with a screwdriver. between side panels [14] and [15] to form the base of the drawer. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 8 If the door is not catching or sitting flush, twist the end of the cover (N) until it catches on the stopper (O). mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
-
Page 9: Wall Mount
(V). Fasten to wall using 1x wall plug (X), 1x washer (Z) and 1x wall screw (Y). Ensure unit is balanced and steady before use. You’re done, enjoy! mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
Need help?
Do you have a question about the Kennedy Entertainment Unit and is the answer not in the manual?
Questions and answers