Table of Contents
Advertisement
Quick Links
Kennedy Coffee Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
C
A
B
bolt
dowel
long screw
x26
x12
x2
H
I
slide
slide
rail x4
rail x4
N
O
washer
al
len
bracket
key x1
x16
WARNING:
Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
D
E
locking
screw
nut x26
x44
J
K
cover
bracket
x4
x4
Q
P
R
l
on
g
screw
x4
bolt x4
x8
Hardware Supplied
F
G
slide
slide
rail x4
rail x4
L
M
plug
screw
x4
x16
S
T
bolt
felt pad
x16
x4
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Mocka Kennedy Coffee Table
Summary of Contents for Mocka Kennedy Coffee Table
- Page 1 The fixing device provided should fit most wall types, but please note that different wall materials may require different fixing devices from those supplied. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 2 4x screws (E). Flip the panel [5], attach 1x slide rail (F) and 1x slide rail (G) to panel [5] as shown with 4x screws (E). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 3 Attach panels [3] , [4] and [5] to panel [1] with 6x dowels (A) and Slide panels [6] down along the grooves between panels [1], [3], [4] secure with 6x locking nuts (D). Tighten with a screwdriver. and [5]. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 4 Tighten with a screw driver. Place 4x covers (K) over the brackets screws (B) and 4x locking nuts (D). Tighten with a screwdriver. (J) as shown. Insert 4x bolts (C) into panel [2] and tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 5 [7] to panel [2] using 4x small bolts (S) and 4x washers (N) as shown. Tighten with the Allen key (O). Attach 4x felt pads (T) to the ends of the legs. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 6 Insert 4x bolts (C) into panel [8]/[9]. Attach 1x plug (L) to panel [8]/[9] and Attach panel [10] and [11] to front panel [8]/[9] using 4x locking nuts (D). secure with 1x screw (E).Tighten with a screwdriver. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 7 Slide panel [12] along the grooves between the side panels [10] and Attach panels [10], [11] and [13] as shown using 4x screws (M). [11] to form the base of the drawer. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 8 Secure with 4x screws (E) and tighten with a screwdriver. sitting flush, twist the end of the cover (K) until it catches on the plug (L). Once assembled lift furniture into place, do not drag. You're done, enjoy! mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Need help?
Do you have a question about the Kennedy Coffee Table and is the answer not in the manual?
Questions and answers