Mocka Kenny Desk Assembly Instructions

Advertisement

Kenny Desk
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B1
bolt &
25mm
nut x13
screw x10
E
F
25mm
foot
screw x2
x4

Hardware Supplied

Phillips & Flathead screwdrivers required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
mocka.co.nz | mocka.com.au
B2
C
12mm
40mm
25mm
screw x3
screw x20
screw x6
G
H
I
14mm
wall
wall
screw x2
anchor x2
strap x2
WARNING:
Any furniture that is not anchored to a wall has the potential to tip over
D
in certain circumstances, i.e. if a child attempts to climb up on the furniture or in the
event of an earthquake. Accordingly, we recommend that all furniture is anchored
to a wall. We supply a free safety wall anchor with all furniture sold and we
recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials
may require different fixing devices from those supplied.
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Kenny Desk and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Mocka Kenny Desk

  • Page 1 Kenny Desk Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
  • Page 2 Kenny Desk Assembly Instructions Attach 4x feet (E) to the ends of the legs. Attach the leg panels together as shown using 6x 25mm screws (B1). Tighten with a screwdriver. mocka.co.nz | mocka.com.au...
  • Page 3 Kenny Desk Assembly Instructions Attach the central panels to the outer leg panels as shown using 3x Attach panel [1] to the leg panels as shown using 4x 25mm screws (B1) 12mm screws (B2). Tighten with a screwdriver. and 6x 25mm screws (C). Tighten with a screwdriver. Insert 3x bolts (A) into panel [1].
  • Page 4 Kenny Desk Assembly Instructions Attach panels [6] and [7] to panel [4] using 3x bolt and nut sets (A). Attach Attach the assembled panels to panel [1] as shown using 3x locking nuts panels [5], [6] and [7] to panel [2] using 5x bolt and nut sets (A). Secure panels (A) and 14x 40mm screws (D).
  • Page 5 Kenny Desk Jolt Wardrobe Assembly Instructions ASSEMBLY INSTRUCTIONS Safety Straps Once assembled, lift furniture into the desired position against a wall, do Ensure unit is balanced and steady before use. You’re done, enjoy! not drag. Attach 2x wall straps (I) to the back sides of panel [1] and secure with 2x 14mm screws (G).

Table of Contents